Is a button worn on your expensive dual-drive touch screen GM navigation radio? Don't let a radio with button wear drag down the looks of your high-dollar vehicle! And don't buy a used button from somewhere else. How long before it starts showing wear too?
If you're in need of a new button for a tilt
touchscreen radio like the one pictured, you've come to the right place. Simply select which button you need from the drop-down list towards the bottom of this ad. Please note that returns are not accepted, so you should read this ad thoroughly and make your selections carefully.
**This listing is ONLY
for the dual-drive touchscreen nav radios that started appearing in 2006. These radios have a CD drive above the screen and a DVD drive behind the screen, which tilts down to access it. These buttons work in the standard, Monsoon, Bose, Bose Lux and non-Bose versions of this radio. They all look identical to the radio pictured here. These buttons are NOT the same as those used on the 2003-2004 non touch screen radios OR the 2005+ touch-screen radios without tilt-screen and dual drive.
This listing is for ONE new button. If you need more than one you will need to add this to your cart multiple times, being sure to select a different button from the drop-down list each time. Note that the NAV button is not listed. We no longer have this button and cannot get it.
Please be aware that GM no longer uses the original manufacturer for these buttons. As a result, slight variations in color are possible. If this possibility worries you, please either get the whole set or look elsewhere because returns are not accepted.
Do NOT attempt to replace these buttons with the radio still plugged in. COMPLETELY REMOVE THE RADIO FROM THE VEHICLE AND UNPLUG IT. Then let it sit for at least 30 minutes!! Otherwise you can VERY easily fry your radio. These radios cost several hundred dollars. Do your wallet a favor and do NOT attempt the button replacement while the radio is plugged in!!
Since the buttons install from the back-side, you will need to dis-assemble your radio to swap your buttons. If you are not qualified to be working on radios, please enlist the help of someone who is.
Your radio has your VIN assigned in memory. It will work without programming once you plug it back in.