- DOES have remote CD changer controls
- Does not have a CD drive built in
- Standard Ford greenish display.
- Auto-reverse cassette mechanism.
- Does not have the subwoofer plug.
- Tested at our facility.
- Good condition (May have very minor blemishes)
- 60 day warranty.
This radio works in the following applications (unless otherwise noted). It is a cassette radio with the ability to control a remote factory CD changer.
- Explorer** - 1998-2001^^
- Explorer Sport Trac - 2001-2005
- F150** (Including Supercrew) - 1998-2003 and 2004 Heritage
- F250 - 1999-2004
- F350 - 1999-2004
- Ranger** - 1998-2008
- Windstar - 1999-2003
- Escape ^ - 2000-2007
- Excursion - 2000-2005
- Expedition** - 1998-2002
- Club Wagon - 1998-2006
- E Series Van - 1998-2008
- Crown Victoria ** ^ - 1998-2005
- Econoline - 1998-2006
- Lincoln Navigator** - 1998-2002
- Lincoln Town Car: 1998-2000 (Except Alpine & Audiophile)
- Mercury Mariner ^ - 2005-2007
- Mercury Marauder ^ - 2004
- Mercury Mountaineer** - 1998-2001^^
- Mercury Grand Marquis ** ^ - 1998-2005
- Mercury Cougar - 1999-2002
- Mazda B-Series Trucks** - 1998-2008
Additionally, if you have a 1997 or older Ford/Lincoln/Mercury with a Double-DIN radio and side clips, you might be able to make this radio work for you with some wiring adapters (not included, but available). If your current radio has two long (@2") plugs that are roughly 1/2" wide, there is a simple adapter that makes the radio plug and play for you. If you have one long 8-pin plug and one rectangular 16-pin plug, you have a remote amp in your system and cannot use a radio like this, even with an adapter. (Unless you use an amplifier by-pass. We don't carry those.)
**They changed the plug styles mid-year 1998. If you've got a 98, make sure yours has the same plugs as this one does. (See picture.) If not, you may need a wiring adapter.
^ Some of the vehicles marked with this symbol have different plugs. If you've got one of these vehicles, make sure yours has these plugs before ordering.
^^Most 2002+ Explorers and Mountaineers have a different mounting system. They use bolt-on brackets at the bottom of the unit. If your current radio does NOT have two small holes at each side on the front of the radio, this radio is NOT the one you need. Yours has the bottom brackets.