• Factory (OEM) LCD display touch-screen plus face
• Don't waste a bunch of time getting to the digitizer
• Get the whole face and save install time*
• *In most cases. See more below.
• Does not work on anything but the base radio
  • Yours must have the two large knobs next to the screen
• Looks like the item pictured
• Pictures are of actual inventory
• We have more than one
• We don't take new pics after each one sells
• From an assembly line leftover radio
• Which was never installed in a vehicle
• Excellent condition
• Includes the face/surround pictured
• With silver trim
• And cut-outs for your dash vents
• Does not include the vents
• You will transfer yours over
• Can be swapped for your trim rather easily
• If yours is a different color
• Attaches to your existing ACM block
• Includes the touch screen panel
• Includes the digitizer 
• It's still attached to the screen
• Easier than removing yours & attaching one*
• *In most cases. See more below.
• Includes the circuit board behind the screen
• *This may need swapped out for yours
• Fits 2013-15 basic/base Accord radios only
• See more info in DETAILS and APPLICATIONS below
• A great way to replace a screen that is:
• Damaged
• Non-functional
• Etc
• Why pay $250+ through the other guys
• And mess with more extensive dis-assembly
• They want you to get down to the digitizer!
• So we give you more for less
• And an easier install to boot...
• Does not include CD drive
• Does not include a radio
• Does not include instructions
• Honda part number is unknown
• Technically they don't sell this
• And it's a combination of several parts anyway
• 90 day warranty for manufacturing defects

This is a factory original Honda Accord base radio face, complete with display panel and the attached touch screen digitizer. Replacing the entire face is often far easier* than installing the digitizer alone, which is the component that often fails. Other sites/sellers are selling just the digitizer for $250 and it's a much bigger pain to get down to that part. 

This face has never been installed in a vehicle, so it is in excellent condition. It was removed from a new, assembly line leftover radio. It includes a 90 day warranty for manufacturing defects. The Honda part number is unknown. (Technically it would be more than one part number anyway, as this is made up of several parts.) You would use it if you smacked yours and broke it, for instance. Or the screen has stopped working but the radio has not.

*By purchasing the entire face, you can usually save time (and avoid the possibility of damage) by swapping it onto your radio. In some cases, however, you may have to swap the circuit board for yours. (Different main connector, for a different region, etc.) If so, it's a matter of a few screws and a few ribbon cables. Still much easier than getting to the old digitizer and stripping it off the screen, then applying the new one. Sometimes your front trim color may not match ours. In this case you might want to swap some parts too.

This only works on the base/basic radios. They are easily identified by the existence of a fairly large knob on each side of the screen.