SUMMARY
- BRAND NEW Factory (OEM) GM radio control/display board
- Includes all the bulbs, in brand new condition
- Includes the three connectors, so it's Plug-n-Play!!
- Works on am/fm/Cass radios from the application list
- Provided they look like the picture below
- Looks EXACTLY like the one pictured.
- A GREAT way to replace a board with:
- bad bulbs or volume, tune or audio controllers.
- NOT compatible with the CD6 radio
- am/fm radio with built-in 6 CD changer)
- Not fully compatible with CD and CD/Cass radios
- Does not have a light for the CD Eject button
- But it can be used anyway
- NOT compatible in trucks or most SUVs and fullsize vans
- Will NOT trigger the THEFTLOCK system
- Plug your radio back in and go.)
- Has NEVER been in a vehicle!!
- Will require removal of your radio from the vehicle
- Do not attempt with radio connected)
- Face is available in one of our other listings
APPLICATIONS
Radios with this same basic board were offered in the cars and mini-vans from 2000 up. If you have a car or minivan and your radio looks like one of the following, this should work for you.
This does NOT work for any vehicles not mentioned. Please don't assume that, just because it looks like the truck/suv board, it will work. It's different. If in doubt, pull your volume or tune knob off the radio. If you have a skinny metal shaft behind it, this is the right board for you. If you have a large plastic shaft, this is NOT the right board. You need the truck/suv board. Returns are not accepted, so you need to make sure you've read this ad and have checked everything BEFORE ordering.
- Chevrolet Blazer (S10): 2002*-2003
- Chevrolet Cavalier: 2003-2005
- Chevrolet Express: 2000-2002
- Chevrolet Impala: 2000-2005
- Chevrolet Malibu: 2000-2003
- Chevrolet Monte Carlo: 2000-2005
- Chevrolet S10: 2002*-2003
- Chevrolet Trailblazer: 2002*-2003
- Chevrolet Venture: 2000-2005
- GMC Envoy: 2002*-2003
- GMC Jimmy: 2002*-2003
- GMC S15: 2002*-2003
- GMC Savana: 2000-2002
- GMC Sonoma: 2002*-2003
- Oldsmobile Silhouette: 2000-2005
*Some 2002 vehicles still had the older style of radio. Make sure yours matches one of those pictured in this listing.
ADDITIONAL INFO
Assembly is pretty easy. You will only need a regular screwdriver to remove the top and bottom plates, a 3/16 nut driver to remove the cassette drive (if applicable) and a 1/8 nut driver to remove the display/control board from your face. You need to disconnect all three plugs for the board BEFORE removing the face. One is under the top plate and two are under the bottom plate, under the cassette drive (if applicable.) You should also remove the radio from the vehicle or disconnect the negative battery terminal for at least 30 minutes prior to beginning this process.
|
