GM Radio Control/Display Board +bulbs: 03+ Truck/SUV CD6

Click to enlarge

DETAILS

Factory remanufactured
Includes all new bulbs
Does NOT include the faceplate (ie - No knobs, buttons, etc)
Plug and Play! No splicing or soldering required.
A GREAT way to replace a board with some burnt out button lights.

See the info in the DETAILS section for info on possible exceptions*

Compatible with the am/fm/CD6 radio ONLY (**See DETAILS)
Not compatible with radios with rotated Tune button (**See DETAILS)
NOT compatible with single CD radio
NOT compatible with CD/Cassette radio
NOT compatible with navigation radio
Compatible with BOSE or non-BOSE CD6 radios
Will NOT trigger the THEFTLOCK system (Plug your radio back in and go.)
6 month warranty
Will require removal of your radio from the vehicle (Do not attempt with radio connected)
Returns are not accepted. Make sure you understand what you're getting.

DETAILS

This works on am/fm/cd6 radios ONLY. The face (trimplate, knobs, buttons, etc) are NOT included. This is for the control/display board only and is only intended to solve problems with burnt out button back-lighting. If your radio has other problems, this won't necessarily solve them. If your display is out, for instance, this board will likely not solve the problem.

In rare cases, there can be a problem on your mainboard which prevents your buttons from lighting. If all your button lights are out, this might not solve your problem. If you know all your button lights went out at once, this board will not solve your problem.

We have noticed some radios display the bar indicators a little weird with these boards. The functions and the adjustments still work, but the on-screen indicator looks 'weird' in some cases. This occurs when you press the small AUDIO knob on the far right or possibly when you adjust the volume.

**A very small number of CD6 radios have a Tune knob that was rotated 45 degrees and the print on your Tune knob will be off-kilter with this board, as a result. If you want to see if yours has the rotated Tune knob, pull your existing Tune knob off, along with the white shaft behind it. Then look at the green socket that is left on the board when you remove the white shaft. If there is a groove on the inside of the socket at the very bottom of it, as well as grooves 90 degrees to each direction of the bottom one, this will work for you. Again, it works in the majority of cases but you should check to make sure since returns are not accepted.

APPLICATION CHART

Radios with this same basic board were offered in the following applications. **A very small number of CD6 radios have a Tune knob that was rotated 45 degrees and the print on your Tune knob will be off-kilter with this board, as a result. If you want to see if yours has the rotated Tune knob, pull your existing Tune knob off, along with the white shaft behind it. Then look at the green socket that is left on the board when you remove the white shaft. If there is a groove on the inside of the socket at the very bottom of it, as well as grooves 90 degrees to each direction of the bottom one, this will work for you. Again, it works in the majority of cases but you should check to make sure since returns are not accepted.

Buick Rainier: 2002-2007
Cadillac Escalade (including EXT): 2003-2006
Chevrolet Avalanche: 2003-2006
Chevrolet Blazer: 2002-2006
Chevrolet Colorado: 2004-2012
Chevrolet S10: 2002-2004
Chevrolet Silverado: 2003-2006
Chevrolet Silverado Classic: 2007
Chevrolet SSR: 2003-2006
Chevrolet Suburban: 2003-2006
Chevrolet Tahoe: 2003-2006
Chevrolet Trailblazer: 2002-2006
Chevrolet Express Van: 2002-2007
Chevrolet Venture: 2001-2006
GMC Canyon: 2004-2012
GMC Envoy: 2002-2006
GMC S15/Sonoma: 2002-2004
GMC Sierra: 2003-2006
GMC Sierra Classic: 2007
GMC Savana Van: 2002-2007
GMC Yukon (including Denali and XL): 2003-2006
Hummer H2: 2003-2007
Isuzu Ascender: 2005-2007
Oldsmobile Silhouette: 2001-2006

^^FRONT^^

^^BACK^^

Assembly is pretty easy. You will only need a regular screwdriver to remove the face and a 1/8 nut driver to remove the display/control board from your face. You will also have to pull the knobs off the front of your face.

You should NOT attempt this repair with the radio plugged in. A short can result. Make sure you unplug your radio from the vehicle harness and let it sit for at least 30 minutes! Theftlock will NOT be activated since your VIN is stored in memory in the radio.

GM Radio Control-Display Board +bulbs: 03+ Truck SUV CD6
[GCD6nb]

$40.00

GM Radio Control-Display Board +bulbs: 03+ Truck SUV CD6[GCD6nb]

$40.00

GM Radio Control-Display Board +bulbs: 03+ Truck SUV CD6
[GCD6nb]