- New
- Taken from an assembly line left-over console
- Excellent condition
- May have very minor blemishes from storage and handling
- OEM original
- GM part number CADS043320
- Platinum gray in color
- Installation instructions appear below
- Returns are not accepted
- Free shipping
DETAILS
This is new and has never been in a vehicle. It was removed from a brand new, assembly line leftover console. (We have the complete consoles available in other listings, as well as wiring harnesses and other parts. Please email if you have questions.) It is in excellent condition, with only minor marks or blemishes from storage and/or transport. It is GM part number CADS043320. It lists for $40+ on the GM sites.
Installation instructions are available below.
APPLICATIONS
INSTALLATION INSTRUCTIONS
Installation is not really hard. The console does not need to come out of the vehicle. You just have to remove the existing tail section. It is held on with six pressure connectors. If you cannot get your hand under the bottom edge of the lower tail, you will need to use a plastic pry tool to get in from each side and pry the very bottom out. Then you should be able to use your hands to pull the tail away, which will pop the remaining clips loose. Once you remove it, you will find one or two wiring connectors holding it on. Push the pressure tabs on those and remove them from the plugs so you can get the old tail out of the way. Then repeat the process in reverse to install the replacement.
This product was last updated on Friday 25 November, 2022.
