SUMMARY
- Don't waste time installing a digitizer only!
- Get the whole face and save on install cost*
- *In most cases. See more below.
- Factory (OEM) LCD display touch-screen
- Found on some navigation and non-navigation radios
- But only if the radio is touch-screen
- And the face looks exactly like this one
- With physical buttons down the left side
- Looks like the item pictured
- Pictures are of actual inventory
- We have more than one
- We don't take new pics after each one sells
- Those are not flaws on the screen
- They're bubbles in the protective plastic
- The plastic gets removed after install
- From an assembly line leftover radio
- Which was never installed in a vehicle
- Excellent condition
- Still has the protective plastic on lens
- You remove it after installation
- Those are not flaws on the screen
- They're bubbles in the protective plastic
- The plastic gets removed after install
- Attaches to your existing ACM block
- With 4 hex screws
- And one ribbon cable
- Includes the touch screen panel
- With the protective plastic still intact
- See the pics for an example
- (Those are bubbles in the plastic, not flaws)
- Includes the digitizer
- It's still attached to the screen
- Easier than removing yours & attaching one*
- *In most cases. See more below.
- Includes the circuit board behind the screen
- Uses only a single ribbon cable connector
- Fits a variety of 2015-2016 touch-screen CR-V radios
- See more info in DETAILS and APPLICATIONS below
- Compatible on radios with Honda part number:
- 39100-T1W-A01
- 39100-T1W-A41
- 39100-T1W-A61
- 39100-T1W-A62
- 39100-T1W-C01
- 39100-T1W-C41
- 39100-T1W-C61
- 39100-T1W-C62
- 39101-T1W-A01
- 39101-T1W-A41
- 39101-T1W-A61
- 39101-T1W-A62
- 39101-T1W-C01
- 39101-T1W-C41
- 39101-T1W-C61
- 39101-T1W-C62
- A great way to replace a screen that is:
- Damaged
- Non-functional
- Non-responsive
- Etc
- Why pay $100+ for a used radio?
- Why get a digitizer only, for similar money?
- And mess with way more dis-assembly
- We give you MORE for less
- And an easier install to boot...
- Does not include CD drive
- Does not include a radio
- Does not include install instructions
- Professional installation is recommended
- By a qualified electronics technician
- Honda part number is unknown
- Technically they don't sell this
- And it's a combination of several parts anyway
- Returns are not accepted
- Because it's an electrical item
- And can be shorted out if installed wrong
- We test it before it ships
- So we know it works
- We are not responsible for improper installation
DETAILS
This is a factory original Honda CRV radio face, complete with display panel and the attached touch screen digitizer. It is found on navigation and non-navigation touch-screen radios. Replacing the entire face is often far easier* than installing the digitizer alone, which is the component that often fails.
This face has never been installed in a vehicle, so it is in excellent condition. It was removed from a new, assembly line leftover radio. It is tested right before it ships, so we know it works. Because it is an electrical part and is easily shorted out if installed wrong, returns are not accepted. But again, we test it, so we know it works. Plus it is NEW. If you have a problem, you have an incompatible radio or it was installed incorrectly. For this reason, we strongly recommend this be installed by a qualified electronics technician.
The Honda part number is unknown. (Technically it would be more than one part number anyway, as this is made up of several parts.) You would use it if you smacked yours and broke it, for instance. Or the touch-screen feature has stopped working, which is a common problem.
*By purchasing the entire face, you can usually save time (and avoid the possibility of damage). It is attached to your radio with just four small hex screws and a single ribbon cable. The connector for the ribbon cable can be a little tricky to manipulate, since there is a lock that must be dis-engaged to remove the cable and re-engaged when the new face is installed. For this reason, we strongly recommend professional installation. Either way, it is still much easier than getting a new digitizer, disassembling the face to get to the old digitizer, stripping it off the screen, then applying the new one.
APPLICATIONS
It was offered in the following vehicles on both navigation and regular touch-screen radios, but that doesn't mean it works in every vehicle on the list. Make sure your face looks exactly like this one. Seriously! We're the radio guys. We wouldn't say it if it wasn't important. There's more to a radio part working for you than merely having your vehicle on a basic year/make/model list. EVERY part offered on a given model is on a list like that. Not just the parts on your vehicle, as equipped. Options, trim level, location, etc all affect which part your vehicle needs. Electronics, which work in conjunction with other parts in the car, are especially important to match up! If you have ANY question, message us BEFORE you purchase!!
This product was last updated on Sunday 21 April, 2024.
