If you're in need of a replacement face for a hardmount Ford, Lincoln or Mercury CD radio like the one pictured, you've come to the right place.

This is for the entire face, including the buttons. It does NOT include the control/display board behind the face or the volume knob. This is for radios that use a hardmount bracket on the bottom of the radio for mounting. It does NOT have the two small holes at each side of the face. It DOES have the flared lip around the edge. This is NOT for the Villager or Quest hardmount radios.

This is a take-off from another radio but it is in good condition. Sometimes there are minor scratches but there is no major wear. If your radio works fine but the face and/or buttons look bad, this is an excellent way to freshen it up. It sure beats paying for a new radio!!

Instructions for installation or removal are not included. If you do not feel comfortable attempting this replacement or are not qualified to perform the replacement you should seek an electronics shop that will do it for you or ask us about sending it in for us to do it. We can tell you that you MUST disconnect the negative battery terminal or remove the plugs from the back of the radio BEFORE you attempt to do any work on the radio. Failure to do so can result in a short within the radio.

This product was last updated on Wednesday 28 January, 2015.