• Brand new
  • Has never been in a vehicle
• Original Equipment (OEM) Ford radio
• Plays standard audio format CDs and CDRs
• Does NOT play MP3s
• Has the RDS feature
  • Displays text for stations that use it
• Has a clock built in
  • See procedures below for setting it
• Model 6000CD
• Ford engineering number 6L8T-18C838-AA
• Works in place of the following as well:
  • 3S41-18C838-B_
  • 3S41-18C838-A_
  • YS4F-18C838-D_, DA, DB, DC, etc
  • Perhaps others
    • Email with questions first
• Perfect condition
• Theft code sticker included
  • See procedures below for entering it
• 6 month warranty

---

APPLICATIONS

---

This radio works in the following applications, if your plugs match*:

• Mercury Cougar: 1999-2000
• Ford Focus: 2000-2004

* It is not compatible with the Blaupunkt or SVT sound system. Additionally, there were a couple different plug styles offered in these vehicles. If you have the am/fm/cass/cd or the Audiophile (9006) am/fm/cd6, the plugs are different and this radio is not compatible. Others may be an issue too. Check your plugs BEFORE ordering. You MUST have BOTH long skinny plugs shown in the picture below.

---

Procedures for setting clock on this model

---

• Press and release Power to turn on radio
• Press and hold Menu button until VID is displayed (@3 seconds), then release
• Press and release Menu button a few times until CLK AUTO is displayed
• Press and release right Seek button to change it to CLK MAN
• Press and release Menu button and CLK SET is displayed
• Press and release left Seek button to make the hours digit flash
• Rotate volume knob to change hours
• Press and release right Seek button to make the minutes digits flash
• Rotate volume knob to change minutes
• Press and release Menu button

---

Procedures for entering code on this model

---

• The word CODE should be displayed on screen at first power-up
• Press (and release) preset 1 as many times as it takes for 1st digit of code to appear on screen
• Press (and release) preset 2 as many times as it takes for 2nd digit of code to appear on screen
• Press (and release) preset 3 as many times as it takes for 3rd digit of code to appear on screen
• Press (and release) preset 4 as many times as it takes for 4th digit of code to appear on screen
• Press (and release) preset 5 to accept code

If you enter the wrong code too many times, it will go into lock mode and you need to try leaving the key on for at least 2 hours to see if it will give you a chance to enter the code again. (The engine does not need to be running.) If that does not solve it, you may need to remove the radio from the vehicle and let it sit for several hours.