This PAC AOEM-GM1416A pre-amp converter (also called a differential converter or high-low converter) is used to convert the speaker output from your standard factory car stereo to RCA cables for easy connection to an aftermarket amp. This will allow you to add up to a 4-channel amplifier to power additional speakers or subwoofers.

On one end, male plugs on the T-harness plug into your factory radio. (You will then plug the factory radio plugs into the provided female plugs on the T-harness.) On the other end of the harness are four female RCA output jacks. You'll use an RCA 'patch' cable to connect it to your aftermarket amplifier.

It has programmable input and output circuitry with slide switches, which allows connection of RCA level or speaker level input or output. DC coupling circuit ensures noise free integration and no load induced on the factory system. This is in contrast to a normal LOC which uses resistors and can stress a factory radio's circuitry.

This is for standard GM car stereo systems. It will not work with premium amplified sound systems. Look in our Add-An-Amp>>Universal category for a product to be used with amplified systems like BOSE.

---

APPLICATION CHART

---

Many 2006 and newer vehicles with the 14 and 16-pin plugs and the 11-bit LAN system. Here are some examples:

• 2006 Chevrolet HHR
• 2006 Pontiac Solstice
• 2006 Saturn Ion
• 2006 Saturn Sky
• 2007 Chevrolet Cobalt
• 2007 Chevrolet HHR
• 2007 Pontiac G5
• 2007 Pontiac Solstice
• 2007 Saturn Aura
• 2007 Saturn Ion
• 2007 Saturn Sky
• 2008 Chevrolet Cobalt
• 2008 Chevrolet HHR
• 2008 Pontiac G5
• 2008 Pontiac Solstice
• 2008 Saturn Aura
• 2008 Saturn Sky
• 2009 Chevrolet Cobalt
• 2009 Chevrolet HHR
• 2009 Pontiac G5
• 2009 Pontiac Solstice
• 2009 Saturn Aura
• 2009 Saturn Sky
• 2010 Chevrolet Cobalt
• 2010 Chevrolet HHR
• 2010 Chevrolet Malibu
• 2010 Pontiac G5
• 2010 Pontiac Solstice
• 2010 Saturn Aura
• 2010 Saturn Sky
• 2011 Chevrolet Malibu

This product was last updated on Wednesday 06 May, 2020.