- BRAND NEW Factory (OEM) GM radio face
- This is not a listing for the entire radio.
- Available with all white print or some orange print (select below)
- Includes all the buttons
- Includes the smooth knobs
- Includes the white shafts behind the two knobs
- Includes the lens
- Includes the trimplate
- Does NOT include the display/control board
- But they are available on our site
- Works on am/fm/CD6 radios from the application list only
- A GREAT way to replace worn, scratched or broken buttons on your radio!
- NOT compatible with am/fm/cd, am/fm/cd/cass, am/fm or navigation radio
- Very good condition
- Fully compatible with BOSE or non-BOSE radios
- Lens does not say BOSE but that is just an appearance thing
- Basic instructions appear below the Application List
ADDITIONAL INFO
Be aware that it might not be exactly the same as your current face, in terms of appearance. A few of the buttons might be labeled slightly differently. The knobs are also smooth instead of the ribbed version found on some of the vehicles below. The display lens color may also be different from your original but, if this bothers you, you can re-use your lens. (This is a bluish/greenish color.) None of those possible differences affect functionality or your ability to use the part.
A
very small number of CD6 radios have a Tune knob that was rotated 45 degrees and the print on this Tune knob will be off-kilter on those radios as a result. If you want to see if yours has the rotated Tune knob, pull your existing Tune knob off, along with the white shaft behind it. Then look at the green socket that is left on the board when you remove the white shaft. If there is a groove on the inside of the socket at the very bottom of it, as well as grooves 90 degrees to each direction of the bottom one, this will work for you. Again, it works in the majority of cases. We just provide this info so you can check, if you are worried.
These faces have been in storage for 10+ years. They are new but some of them (particularly the ones with all white print) were not stored quite right and have picked up a few very minor scuffs, nicks or hair scratches over the years. They are still obviously new faces and are in very good condition overall. Certainly MUCH better than a face with a bunch of worn buttons.
APPLICATION LIST
Radios with this same basic face were offered in the following truck/van/SUV applications. This works on am/fm/cd6 radios on this list only.
- Buick Rainier: 2002-2007
- Cadillac Escalade (including EXT): 2003-2006
- Chevrolet Avalanche: 2003-2006
- Chevrolet Blazer: 2002-2006
- Chevrolet Colorado: 2004-2012
- Chevrolet S10: 2002-2004
- Chevrolet Silverado: 2003-2006
- Chevrolet Silverado Classic: 2007
- Chevrolet SSR: 2003-2006
- Chevrolet Suburban: 2003-2006
- Chevrolet Tahoe: 2003-2006
- Chevrolet Trailblazer: 2002-2006
- Chevrolet Express Van: 2001-2007
- Chevrolet Venture: 2001-2006
- GMC Canyon: 2004-2012
- GMC Envoy: 2002-2006
- GMC S15/Sonoma: 2002-2004
- GMC Sierra: 2003-2006
- GMC Sierra Classic: 2007
- GMC Savana Van: 2001-2007
- GMC Yukon (including Denali and XL): 2003-2006
- Hummer H2: 2003-2007
- Isuzu Ascender: 2005-2007
- Oldsmobile Silhouette: 2001-2006
Assembly is pretty easy. First you will remove the radio from the vehicle and let it sit at least 30 minutes before attempting the repair. Then you just pry the face off carefully and use a 1/8 nut driver to remove the display/control board from your face. You will also have to remove the knobs from the face before the board will come off.
Appearance may vary slightly from these pictures. Some buttons may be labeled a little differently but are still functional.
OPTIONS
This product was last updated on Saturday 28 March, 2020.