• BRAND NEW Factory (OEM) GM radio face
  • This is not a listing for the entire radio
• Includes all the buttons, in brand new condition
• Includes the knobs, in brand new condition
• Includes the trimplate and lens in brand new condition
• Includes the display/control board
  • But you might need to swap it for yours
• Dark gray in color
• Works on radios manufactured by Fujitsu Ten only!!
• Works on am/fm/CD AND am/fm/CD6* radios
• Does not work on Delco Delphi manufactured radios
• Does not work on Panasonic manufactured radios
• A GREAT way to replace worn, scratched or broken buttons!
• NOT compatible with am/fm, cd/dvd, or navigation radios
• Fully compatible with BOSE or non-BOSE radios
• Check your radio manufacturer first!!
• Returns are not accepted

---

DETAILS

---

Does your GM Fujitsu Ten radio have worn or damaged buttons that leave your stereo looking shabby? If so, this could be the listing for you. This is a new radio face, loaded with all the knobs and buttons. It has never been installed in a vehicle, so it has zero wear!

This works on Fujitsu Ten manufactured radios only. Not all LAN radios were manufactured by Fujitsu and there is no way to tell them apart without removing your radio and checking the sticker for the manufacturer.

Radios with this same basic face were offered in car, truck and van applications. This is the dark gray version. Other colors were offered, including black. This will obviously stand out in your vehicle if you do not currently have a dark gray face. You could remove the buttons from it and swap them into your radio to reduce the effect but it will be two-tone then.

*Even though this does not have the LOAD button, this also works on CD6 radios. You'll either have to use your LOAD button or know that you press the button with the clock symbol to load CDs now.

**It should be noted that this particular face was offered on radios with a greenish/bluish display. Consequently the lens has a slight blue/green hue. This will probably change your display color a little bit if you do not have that color now. If it bothers you, you can always pull all the new buttons out of this face and swap them to yours. The buttons themselves were also back-lit blue/green on the original radio. This means they have the corresponding coating on the back side. Consequently it will have a different appearance than your current radio at night if yours are different.

Again, not all applications had the Fujitsu version. Just because they look identical from the face does not mean they are designed the same internally, including the back side of the buttons, where they need to make contact with your board. To be safe you need to check the manufacturer listed on your part number sticker. You will need to remove your radio to do this. If you are unsure, please call us with the radio out and in your hands. Do not purchase without confirming your manufacturer first because returns are not accepted.

Installation is pretty easy, but we do not include instructions. You shouldn't be working on radios if you're not qualified or experienced.

---

APPLICATIONS

---

A known compatible CD radio part number is 25957376, but other numbers are possible. Again, there might be slight cosmetic differences from yours. Read the asterisked (* and **) paragraphs in the DETAILS section for more info. Please email BEFORE purchasing if you have questions, since returns are not accepted.