• Original Equipment (OEM) Nissan radio face
• Not a complete radio
• From a New Old Stock assembly line leftover radio
• Perfect condition
• Has never been used
• Factory touch-screen radio face
• Not a complete radio
• You get what is pictured
• Actual inventory was used for pics
• Compatible with factory SiriusXM
• Compatible with factory Bluetooth
• Compatible with factory Android Auto
• If you have it now
• Compatible with factory Apple CarPlay
• If you have it now
• Compatible with factory backup camera
• If you have it now
• Does NOT have a MAP button
• Intended for exact replacement only
  
• Not for upgrades/downgrades
• Manufactured for Nissan by Bosch
• Works on radios with Nissan part number:
• 2591A-6RR0E
• 2591A-6RR0D
• 2591A-6RR0C 
• 2591A-6RR0B
• 2591A-6RR0A
• 2591A-6RR1A
• 2591A-6RZ2C
• 2591A-6RZ2B
• 2591A-6RZ0B
• 2591A-6RZ0A
• 2591A-6RF0E
• Match one of these part numbers to yours!!!
• A MUCH better option than:
• Paying Nissan $1000+ for a new radio
• And then paying for dealer programming
• Buying a used radio
• And inheriting someone else's problem
• Trying to replace your digitizer panel
• Your VIN will be required before shipment
• Not to check compatibility up front
• Don't assume we're doing that for you
• That is your responsibility
• Requires only four screws to be removed for swap
• You use a T8 bit
• Will not require programming
• Plug and play
• 90 day warranty

The radio that uses this face was offered as an option in the following vehicles.  But that doesn't mean it fits EVERY vehicle that happens to be on the list.  Check your part number and make sure it matches one of them we have listed above!! If it doesn't, please send us a message with your part number and we will research compatibility before you purchase... 

• Rogue: 2021-2026 (Usually S and SV trim only)

This is a radio face only. It would be used if the face/screen on your radio is damaged or non-functional. You will swap this face to your radio. This will require you to remove four T8 (Torx) screws from the side of your radio block, just behind the face. Then you will carefully pull your block away from the face and transfer it to this new face. 

This face is compatible with a wide variety of Nissan radio part numbers starting with 2591A. (See the list above.) It is NOT the same as the faces found on radios starting with 25915. Those have factory navigation built in and are easily identified from the front by the existence of a MAP button, which our face does not have. Our face is from a radio that would require you to use CarPlay or Android Auto to display a map.

Replacing your entire screen is a better option than trying to track down your exact radio part number. Plus this is New, so you are not inheriting someone else's problem. But, unlike purchasing a complete radio New, this will not require dealer programming after installation. It is also MUCH easier than trying to install a new digitizer panel on your existing radio...