- Brand new in the retail packages
- Control SiriusXM from the car radio
- No ugly dash-mounted tuners with this package!!
- Displays SiriusXM text (song and artist)
- On satellite-capable radios *
- Hundreds of dollars less than a factory satellite kit!
- Direct connection to your factory USB port
- Compatible with or without steering wheel controls
- Compatible with or without JBL
- Compatible with or without navigation system
- Compatible with or without RSE DVD system
- Compatible with or without factory CD changer
- Vehicle must be on the Application List below
- You must have a MODE button on your steering wheel
- Vehicle must have factory USB data port
- Optional fast charge USB cable available
- See OPTIONS section below
- Super small antenna (@1.5" x 1.5" x .5")
- With magnetic base & 20ft cable
- Connection of a power and ground wire will be required
- Assembly and operation manuals are included
- Consists of Vais and SiriusXM compnents
- Vais model number GSR-TY52
- SiriusXM model number SXV-300
- Vais components have a 1 year warranty
- Sirius XM components have a 90 day warranty
DETAILS
This package will allow you to listen to and control all 175+ channels of SiriusXM satellite radio directly through your factory radio. (See the application list below.) It can receive the Select or Premier programming. (Additional subscription fees apply for Premier.) It displays the same type of information (station #, song title, artist name, etc) as the factory satellite kits, yet it costs less.
Unlike external tuners that clutter up your dash and attract thieves, this interface allows control of SiriusXM satellite radio through your existing factory stereo. It is directly connected to the vehicle via the factory USB port, which allows you to retain factory options connected to the back of the radio. Since it is directly connected, you don't have to rely on the poor performance of an FM modulator or cassette adapter.
This has the added advantage of adding connectivity for an optional USB fast charge (2.4A) cable. This allows for quicker charging on devices that support that capability. Only the Gen2 GSR devices support this. If the other guy's ad doesn't mention it, you're probably buying the older Gen1 device. If you would like to add that cable, please see the OPTIONS section towards the bottom of this listing.
How does this differ from their GSR-TY52 product? This GSR-TY52 is designed to plug in behind the radio, where-as this GSR-TY02 plugs in the factory USB port on your dash (or in your console.) Unlike the GSR-TY52, you don't have to remove the radio to install this GSR-TY02, but you do have to tap into power and ground wires with this GSR-TY02, which you don't have to do with this GSR-TY52. Finally, this GSR-TY02 costs a little less than the GSR-TY52 because of the additional T-harnesses that are included with the GSR-TY52 and the fact it upgrades your USB port to fast charge capability. (It is not an optional, extra-cost cable like it is with this GSR-TY02.)
INSTALL INFO
How's it installed? It's pretty simple really. Since it plugs in your factory USB port, you don't need to pull your radio like you do with most other kits. That will save you some time and effort. Step one is to route your antenna. (The manufacturer recommends it be outside the vehicle but some customer have good luck placing it on the dash. It is about the size of a half dollar so it is fairly unobtrusive.) Step two is to put all the equipment under your dash, out of sight. Step three is to connect the power and ground wires. Step four is to route the USB cable to the USB port in your console. (Or wherever it is located.) This may involve some relatively minor dis-assembly of your console. Since the USB port is often out of sight under a console lid, you won't even see you have something plugged in under normal conditions.
As mentioned, connection of power and ground will be required for use of this kit.
Please email us if you require more information.
Included with this package
- New SXV300 SiriusXM tuner and antenna kit
- New VAIS GSR-TY02 interface
- New USB cable to connect interface to factory USB port
- Power and ground cable
- Operation manual
APPLICATIONS
OPTIONS
| Available Options: |
| Additional Cable Options: |
|
