- This is NOT a listing for a complete radio!!
- New Old Stock Factory (OEM) GM Delco CD6 drive
- Manufactured by Panasonic for Delco
- Installation instructions are NOT included
- But basic ones appear below
Your drive MUST match one of the PCB numbers listed below
This is the truck, van and SUV drive
A GREAT way to replace a CD6 drive that has went bad on you.Only compatible with the CD6 radio
- am/fm radio with built-in 6 CD changer
Compatible with BOSE or non-BOSE CD6 radiosDoes not work in all 2004 models.
, match yours to the pictures!!Not compatible with remote (separate from radio) CD Changer
Not compatible with navigation radiosNot compatible with single CD or CD/Cass radios
Not compatible with MP3 CD radios
Plays standard audio format CDs and CDRs
Bottom PCB board number E-9060A-2
- Works in place of E-9058-2 as well
Has a 14-pin ribbon connector on bottom green PCB board
Has a 15-pin plug on top green PCB board
Will NOT trigger the THEFTLOCK system
- Plug your radio back in and go
Has NEVER been in a vehicle!!Will require removal of your radio from the vehicle
- Do not attempt with radio connected
Will require transfer of your top control board to this drive
Plug and play. No soldering or splicing required.
6 month warranty
DETAILS
Does your am/fm/cd6 radio have problems loading, ejecting and/or playing CDs? Does it give CD error messages on the radio display? Does it skip excessively? If it exhibits any of these problems, fix it with this brand new CD6 mechanism from ReplacementRadios!!
This is a brand new 6 disc CD drive for select GM Delco
radios. Even though it looks like the same drive used in various other
applications (Ford, Nissan, Toyota, Audi, Hyundai, Honda, etc), this is
the GM version and they are not usually interchangeable. You will need
to pop the top case off your GM radio to verify yours has one of the bottom board PCB numbers listed above because some of the radios were offered with a different, incompatible drive. If yours doesn't have two openings above the CD trays (kidney shaped, as pictured), it might not work for you. There was a version with one triangular shaped opening. This is NOT compatible with most of those versions! (Except the E-9058-2.) Number stampings on top of the drive will vary, obviously. Sometimes the size/shape of the green board varies a little too. Both of these differences are acceptable.There
will be no returns accepted on this item for any reason other than
functional defect. Even then, only exchanges will be offered, not
refunds, so please do your research BEFORE purchasing.
This drive might also appear identical to the mechanism used in the remote CD6 drive found in some vehicles. (Mounted below the radio.) However, we do not guarantee it for those applications either. It is only intended for am/fm/cd6 radios that have a drive matching one of the picture in this ad. Again, there will be no returns accepted for this item for any reason other
than functional defect. Even then, only exchanges will be offered, not
refunds, so please do your research BEFORE purchasing.
There were several other versions of this drive in GM radios as well.
They are not usually interchangeable. You will need
to pop the top case off your GM radio to verify yours has one of the bottom board PCB numbers listed above because some of the radios were offered with a different, incompatible drive. If yours doesn't have two openings above the CD trays (kidney shaped, as pictured), it might not work for you. There was a version with one triangular shaped opening. This is NOT compatible with most of those versions! (Except the E-9058-2.) Number stampings on top of the drive will vary, obviously. Sometimes the size/shape of the green board varies a little too. Both of these differences are acceptable.Again,
there will be no returns accepted for this item for any reason other
than functional defect. Even then, only exchanges will be offered, not
refunds, so please do your research BEFORE purchasing.
Installation is relatively easy but, if you're not mechanically
inclined, you shouldn't be buying it. Some basic install instructions appear in a special section below. We provide these as a courtesy. Please don't hold it against us if you find there are slight differences in your application.
There is a 6 month replacement warranty on this item. It covers functional defects only.
APPLICATIONS
Many 2002-2004 GM vehicles with am/fm/cd6 radios. The most important thing is that your drive matches one of the bottom PCB board numbers listed above in the SUMMARY. Match yours because returns are not accepted if you've made a mistake.
In
very rare instances, you may find that replacing the
drive does not solve your problem. Replacement of your radio might be your only option. Please be aware that we have no control over this. Nor do we have any way of predicting when this is going to happen.
Removal/Installation Instructions
Instructions are not included but installation is relatively easy.
However, if you're not mechanically inclined, you shouldn't be buying
it. Basically, you remove the face by prying it off. Then you remove
two 3/16 hex screws holding the drive in from the front and two more from the
rear. The drive can then be lifted out (carefully) and the ribbon cable
pulled free of it. If there is a bracket attached to the back of your
drive and there isn't one on the drive you receive, you will need to swap it to the new one.
We provide these instructions as a courtesy. Please don't hold it against us if you find there are slight differences in your application.
Do not attempt this repair with the radio still plugged in! You must unplug it from the vehicle wiring harness and let it sit for at least 30 minutes prior to opening it up!
This product was last updated on Monday 02 March, 2026.
