These are the u-shaped tools that are used for removing most Ford, Lincoln, Mercury and many Mazda radios from the dash from the late 80's to the present.

If your radio face has two little holes about an inch and a half apart on both sides of the face, these are the tools you need to remove your radio from the dash very easily. Just slide them in until they pop over the tabs, then push them towards the dash on both sides and pull the radio out. If your radio does not have two small holes on each side of the face, these tools won't work for you. Yes, you should be able to see the holes from inside the vehicle before dis-assembling the dash. If you don't, you don't need these tools.

Don't risk tearing up your radio and your mounting clips with some homemade tools. These are brand new tools made specifically for this purpose.

Each package contains one pair of tools. Tool color (and appearance) may vary from the photos, as our supplier sometimes ships from different manufacturers. Color and appearance does not affect their use. They will work for the vehicles and radios indicated above.