2002+ Chrysler radio Bluetooth streaming audio music kit

2002+ Chrysler radio Bluetooth streaming audio music kit: Specialty [CHY3-IPBT]	$129.99

Click to enlarge

SUMMARY

Brand new
Allows you to stream audio wirelessly from your Bluetooth device
Play audio from your favorite app or native music player
Uses the Bluetooth standard: A2DP
Compatible with Android, Apple and Windows Bluetooth devices
Includes a 30-pin iPod cable for direct connection of some iPods/iPhones/iPads
Plug and play (Unlike other kits, there's no splicing required)
Pair it once and it's ready to use!
Bluetooth receiver gets it's power from the radio (Does not need charged)
Can be mounted out of sight under dash
Cable is 10' long to allow for multiple receiver mounting locations
Plug and Play. No splicing required.
Bluetooth transmission range is 10'
Control of songs (other than volume) is done from phone/device
- An optional wireless remote is available in UPGRADES below
Compatible with factory radios only (Not aftermarket)
Connects via factory plug on back of the radio (The best possible connection)
- No FM modulator or cassette adapter required
Compatible with or without factory steering wheel controls
Not compatible with remote factory CD changer (Must be disconnected)
Compatible with or without premium sound system (Bose/etc)
Not compatible with remote (separate from radio) devices (Must be disconnected)
Radio must have a MODE button
Radio must be labeled with "DISC ^" on Preset button #1
90 day warranty on Bluetooth receiver
1 year warranty on all other parts

DETAILS

This kit will allow Bluetooth music streaming from any Android or Apple device through select Chrysler, Dodge, Jeep factory radios. This device connects to the factory plug on the back of your radio using the included vehicle-specific cable. (Your radio plug is normally reserved for a remote CD changer, satellite radio, etc.) A direct connection is FAR superior to the sound quality you get using an RF modulator OR cassette adapter device.

This kit terminates with a mini Bluetooth streaming audio receiver. (Appearance may vary slightly from picture.) There are additional connections in between that allow the device to be more versatile and permit you to replace a single component should you have a problem down the road or need to move it to another vehicle, rather than buying a whole new kit.

Just make all the connections (they are obvious and unique), pair your device to the Bluetooth receiver, hit the AUX button on your radio and you're wired for sound! Please note that you may have to adjust the volume on your phone/device initially in order to get the volume to an equivalent level to your regular radio output. You control the music from your device/phone unless you add the optional mini wireless Bluetooth remote control from the UPGRADES section below. It connects to your phone/device as a wireless keyboard and let's you perform basic control functions like track forward and back.

** You cannot use this device if your radio does not have CD Changer controls. Your radio must have a MODE button and have disc up and down labeling on the preset buttons.

Use of this device will require you to disconnect any remote device that is currently connected to your radio.

How does this differ from our AIBT line? -- This IPBT kit provides power to the Bluetooth receiver, so it does not require charging. The receiver in the AIBT kit requires charging. This IPBT kit includes a 30-pin Apple cable that can be used in lieu of the Bluetooth receiver, while the AIBT line includes a 3.5mm cable that can be used in lieu of the Bluetooth receiver.

Included with this package:

interface module

Cable to connect 30-pin iPod to interface

Mini Bluetooth receiver with 30-pin connection

Harness to connect interface behind factory radio

Operation and connection instructions

Compatible with all Android products with Bluetooth: