|
This item has been marked as SOLD OUT. This usually means we can no longer get it and/or it was discontinued. We do not expect it to be available again any time soon, if at all. If it comes back in stock unexpectedly, we will update the site. If you select the Notify option in the right column, you will receive an email if and when this happens.
SUMMARY
- OEM GM keyless entry flip remote/fob
- Brand new in the package
- 4 button model
- Lock, Unlock, Panic and Hatch
- Information on the remote:
- GM part number 13500222
- FCC ID: OHT01060512
- For vehicles without remote start
- Will not work for vehicles with it
- Not compatible with push-to-start option
- Programming will be required
- Does not include a key blade
- Your will swap yours to this one
- Requires only a 1/16th punch
- See more info in DETAILS
- We have other listings with blade included
- Has the Chevy logo on it
- 30 day exchange only warranty
- Returns are not accepted
- Free shipping
DETAILS
This OEM GM remote (aka: fob) has never been programmed to a vehicle. It is an assembly line left-over. It has four buttons on it: Lock, Unlock, Hatch and Panic. The blade has been removed, so you will need to swap your blade into it. This is easily accomplished by driving out the pin on the blade housing with a 1/16th punch. (Or you can check out our other listings with the blade included.)
As with many vehicle parts, there are multiple versions that sometimes look the same or similar. To ensure you can use this, make sure your current remote part number or FCC ID matches what we have listed above. The FCC ID appears to have been listed for some Buick Encore, 2013-2016 Buick Lacrosse, 2013-2016 Buick Regal, 2011-2015 Buick Verano, 2010-2015 Chevy Camaro, 2011-2015 Chevy Cruze, 2010-2017 Chevy Equinox, Chevy Impala, 2013-2016 Chevy Malibu, 2012-2017 Chevy Sonic and 2010-2017 GMC Terrain vehicles. (Of course this has a Chevy logo on it, so keep that in mind...)
Programming of this fob will be required. If you have a functioning key (and fob) in your possession, you can try the following: Insert the functioning key (with fob) into the ignition, turn it to ON (not Run) for 3 seconds, turn it off, remove the key, insert the key attached to the new fob into the ignition, turn it to ON and a message should flash on the info screen after 3+ seconds that a 3rd (4th, 5th, etc) remote has been programmed. This can also be performed at a GM dealer if you are having troubles. Please understand we have no control over the GM programming process. These are brand new fobs and can be programmed successfully if the correct procedure is followed. Not being prepared (or willing) to do this does not make this defective or not usable.
This is a clearance item, so returns are not accepted. However, there is a 30-day exchange warranty on it for your peace of mind.
|
